Burst or frozen pipe flooding a room
We shut off the water, cut out the failed section, and solder or press in new copper pipe or PEX tubing. Adjacent runs get thawed and insulated so the same line doesn't split again next cold snap.
When a pipe bursts or your water heater fails, emergency plumbing Annapolis MD gets a licensed technician to your door fast. We handle burst pipes, sewer backups, and no-hot-water calls around the clock in Anne Arundel County. One call reaches a real plumber who diagnoses the problem and starts the fix the same visit.

Emergency plumbing Annapolis MD is the round-the-clock service that stops active water damage, restores hot water, and clears sewage backups before they wreck floors, walls, and fixtures. It covers burst pipe repair, slab leak detection, frozen pipe thawing, water heater failure, sewer line backup, and overflowing toilets. A licensed tech arrives with a pipe wrench, leak detection camera, and press tool to isolate the problem, shut off the water if needed, and make a code-correct repair on the spot.
Annapolis homeowners call us most often after a winter cold snap cracks a supply line, when a sump fails during a storm, or when a water heater lets go the night before a holiday. Older housing stock in the Historic District and Eastport means copper pipe and cast-iron drains that fail without warning. If you search for an emergency plumber near me Annapolis MD at 2 a.m., you reach a live dispatcher, not a voicemail box.
Every emergency call includes dispatch, on-site diagnosis, an upfront quote, the repair itself, and a test before we leave. Parts and labor are quoted together so you're not nickel-and-dimed. Here's what's covered on a standard call.
A live dispatcher answers any hour and gives you a real arrival window. Active flooding is prioritized over slow leaks, and you get the technician's name before they roll.
We find the actual source with a leak detection camera, pressure readings, or a drain camera before quoting. No opening walls on a guess, and no repair that misses the root cause.
You see the price for parts and labor before work starts. If the diagnosis changes mid-job, we stop and re-quote rather than surprise you at the end.
Burst pipe repair, water heater fix or swap, sewer line clearing, toilet or faucet repair, and disposal work. Most calls finish in one visit with parts from the truck.
We test the repair under pressure, run the fixture, and check for drips. The work area gets wiped down and old parts hauled off before we leave.
You get a warranty on the repair and a plain-language summary of what failed and what to watch for. If a permit was pulled, we tell you what the inspection covers.
You reach a real person, not a call center script. We ask what's leaking, where the shutoff is, and whether water is near electrical panels. You get a technician name and an ETA window, usually within 60 to 90 minutes for active flooding in Annapolis.
The tech arrives, confirms the shutoff, and contains the damage first. Then comes diagnosis: a leak detection camera for slab leaks, a drain snake or hydro jetter for backups, and pressure readings on the supply side. This takes 15 to 30 minutes on most calls.
Before any repair starts, you get a written price covering parts and labor. We explain what failed and why, and what the fix involves. You approve or we stop there. No work begins without your okay.
Most emergency repairs finish in one visit, typically two to four hours. Burst pipe repair means cutting out the failed section and soldering or pressing in new copper pipe or PEX tubing. Water heater failure means a swap or a same-night fix depending on the diagnosis.
We pressure-test the line, run the fixture, and check for drips before we pack up. The work area gets wiped down and old parts hauled off. You get a warranty on the repair and a plain-language rundown of what to watch for next.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Finds hidden supply and slab leaks without tearing up a whole floor. We pinpoint the source, then open only what's necessary.
Clears main-line and branch blockages. The snake handles roots and solids; the hydro jetter scours grease and scale from the pipe wall.
Makes copper and PEX connections fast and without open flame, which matters in tight crawlspaces and finished walls.
The basics for cutting out failed sections and making up threaded or soldered joints on copper pipe and galvanized lines.
We solder where code and access allow, and press where flame isn't safe. Both methods meet Anne Arundel County code.
A homeowner woke to water across the kitchen floor from a split copper line under the sink. The shutoff was behind a cabinet and the line had been dripping for hours before it let go.
We shut off the main, cut out the split section, and pressed in new copper pipe. Pressure test held at 80 psi, and the repair was done in about two hours. The cabinet dried out with no flooring replacement needed.
Sewage backed into a laundry room floor drain after a storm. The homeowner had tried a plunger and a store-bought snake with no luck, and the backup was getting worse with each load of laundry.
We cameraed the main and found root intrusion in the old cast-iron lateral. A hydro jetter cleared the roots, and we repaired the failed section under an Anne Arundel County permit. Flow test passed and the backup cleared the same visit.
A 12-year-old tank started leaking from the shell the night before a holiday. The homeowner had no hot water and a puddle spreading toward a finished basement wall.
We isolated and hauled out the old tank and installed a same-size Bradford White unit from the truck. Hot water was back in about three hours, and we checked the expansion tank and shutoff while we were there.
These are the calls that can't wait until Monday. We stock the parts and carry the tools to handle each one on the first visit.
Ask a pro →We shut off the water, cut out the failed section, and solder or press in new copper pipe or PEX tubing. Adjacent runs get thawed and insulated so the same line doesn't split again next cold snap.
We camera the line to find root intrusion or a collapsed section, clear the blockage with a drain snake or hydro jetter, and repair or replace the failed run under an Anne Arundel County permit when required.
We diagnose the failure on site. If it's a repairable element or thermostat, we fix it. If the tank is rusted through, we swap it for a Rheem or Bradford White unit from the truck, often the same day.
We replace fill valves, flappers, and shutoffs, and fix supply-line connections. Most of these jobs finish in under an hour, and we check the adjacent fixtures while we're there.
$180 - $1,800 depending on scope
Typical 2026 pricing in the Annapolis area runs $180 to $450 for common emergency repairs like a running toilet, failed shutoff, or a cleared branch drain. Burst pipe repair and water heater swaps run higher, from $450 to $1,800 depending on access and parts. After-hours calls carry a modest surcharge, and we quote it before we roll. You get a written price before work starts, and we don't add parts markup games at the end.
You're paying for a licensed plumber who diagnoses the actual cause, fixes it to code, and tests it before leaving. A cheap fix that fails inspection or misses the root cause costs more in the long run.
Overnight, weekend, and holiday calls carry a modest after-hours surcharge. We quote it when you call so there's no surprise on the invoice.
A burst pipe behind a finished wall or under a slab takes more labor than one in an open crawlspace. We camera and locate first so we open only what's necessary.
A $12 cartridge job and a $900 water heater swap are different animals. We stock common parts to keep the price down and quote parts and labor together.
Some repairs require an Anne Arundel County Plumbing Permit and inspection. We tell you when a permit is needed and include it in the quote rather than springing it later.
“A supply line under our kitchen sink let go at 11 p.m. and water was running across the floor. The tech arrived in about 70 minutes, shut it down, and had the copper pipe replaced before 1 a.m. He showed me the split section and explained why it failed. Clean, fast, and the price matched the quote.”
Dana R.Homeowner, Eastport
✓ Verified“My rental had no hot water on a Friday night and the tenant was furious. They had a Bradford White tank on the truck and swapped it Saturday morning. Tenant had hot water by noon. As a landlord, that same-day turnaround is what keeps me calling them.”
Marcus T.Landlord, Downtown Annapolis
✓ Verified“Sewage backed up into our laundry room during a storm. They treated it as a priority, cameraed the line, and found root intrusion in the old cast iron. Repaired it and pulled the county permit. It's been dry through two heavy rains since. I've already recommended them to two neighbors.”
Ellen K.Homeowner, Bay Ridge
✓ VerifiedCall a licensed 24/7 plumbing company that dispatches a real technician, not a call center. We answer around the clock and send a Maryland-licensed plumber for burst pipes, sewer backups, and no-hot-water calls. Have your shutoff location ready and describe what's leaking so we can triage severity and give you an accurate ETA.
Most Annapolis calls see a technician in 60 to 90 minutes for active flooding, and same-day for non-flooding emergencies like a failed water heater or a clogged main. Response depends on traffic and call volume, but we give you a real ETA window when you call, not a vague promise.
Yes. Our 24 hour plumber Annapolis MD line is staffed every night, weekend, and holiday. Overnight calls are triaged by severity, so an active burst pipe or sewage backup jumps ahead of a slow drip. You reach a dispatcher who can send a licensed tech, not an answering service.
Active flooding, burst pipe emergency plumber Annapolis MD calls, sewage backing into the house, no water at all, a gas water heater leak, or a water heater failure with no hot water all count. A slow drain or a dripping faucet can usually wait for a scheduled visit. When in doubt, call and we'll tell you honestly.
One call reaches a licensed plumber who can shut off the water, diagnose the problem, and start the repair the same visit. We answer 24/7, quote upfront, and stand behind the work with a warranty.
Call Now +1 (831) 293-1204 →Call us at +1 (831) 293-1204 or email [email protected]. We answer the phone 24/7 for emergencies and schedule same-day or next-day visits for non-urgent work. Tell us what's wrong and your address, and we'll give you a time window and a price range before we head out.