Stop the drip, save water, protect your cabinets

Faucet Repair Annapolis MD Done Right the First Time

When a faucet starts dripping, it wastes water and money every minute. Our faucet repair Annapolis MD service fixes leaking kitchen and bathroom fixtures fast, usually in a single visit. We handle everything from worn cartridges to corroded supply lines, and we test every repair before we leave. Call today for same-day service.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

No spam. No obligation. Just practical help.
Thanks — we'll call shortly to confirm your visit.
Faucet Repair in Annapolis, Maryland
Careful work. Honest options.
About this service

Faucet Repair Annapolis MD: What to Expect

Faucet repair Annapolis MD is the process of diagnosing and fixing the valves, seals, cartridges, and supply connections that control water flow at your sink. A dripping faucet can waste thousands of gallons a year and stain sinks, but the real damage often happens under the counter where slow leaks rot cabinet floors and breed mold. We repair all major brands including Moen, Delta, and Kohler, and we stock common parts on every truck so most jobs finish in one trip.

Annapolis homes face specific faucet stress: hard water leaves mineral deposits that chew through rubber seals, and older homes in the Historic District often have original brass fixtures that need careful handling. Whether it's a kitchen faucet leaking repair Annapolis Maryland homeowners call about after noticing a puddle under the sink, or a bathroom faucet dripping repair Annapolis MD request from a guest bathroom, we handle both. We also fix outdoor spigots and utility sinks.

  • ✓ Lower Water Bills
  • ✓ Protect Cabinets and Floors
  • ✓ Extend Fixture Life
  • ✓ Avoid Emergency Calls
What's included

What Our Faucet Repair Includes

Our faucet repair service covers the full job from diagnosis to cleanup. We don't leave until the leak is fixed and you're satisfied.

✓

Full Diagnosis

We inspect the faucet, supply lines, and shutoff valves to find the root cause of the leak. We check for corrosion, mineral buildup, and worn parts.

✓

Parts Replacement

We replace worn cartridges, O-rings, seats, springs, and supply lines. We use genuine parts for major brands like Moen, Delta, and Kohler.

✓

Leak Testing

After repairs, we run the faucet through hot and cold cycles and check under the sink for any leaks. We also verify water pressure is correct.

✓

Shutoff Valve Check

We test the shutoff valves to ensure they work properly. If they're corroded or stuck, we can replace them to prevent future issues.

✓

Cleanup

We clean up the work area, remove old parts, and leave your sink ready to use. We also give you tips to prevent future leaks.

How it works

Our Faucet Repair Process

01

Diagnose the Leak

We inspect the faucet, supply lines, and shutoff valves to find the exact source. We check for corrosion, mineral buildup, and worn seals, then explain what we found and the repair options.

02

Quote the Repair

You get a clear price before we start. We list the parts and labor needed, and if we find additional issues like a failing shutoff valve, we let you know before proceeding.

03

Repair or Replace Parts

We replace cartridges, O-rings, seats, springs, or supply lines as needed. We use genuine parts for Moen, Delta, and Kohler fixtures and carry common sizes on the truck.

04

Test and Verify

We run the faucet through hot and cold cycles, check for leaks under the sink, and confirm water pressure is correct. We also inspect the drain connection while we're there.

05

Clean Up and Review

We wipe down the work area, remove old parts, and show you what we fixed. We also give you tips to prevent future issues, like installing a water softener if hard water is the culprit.

Tools & methods

Tools and Methods We Use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Pipe Wrench

Used to loosen and tighten supply line connections and shutoff valves without damaging the fittings.

Leak Detection Camera

Helps us find hidden leaks behind walls or under cabinets without unnecessary demolition.

Soldering Torch

Used for soldering copper pipe connections when replacing supply lines or valves.

Press Tool

For making quick, reliable connections on PEX and copper pipe without soldering.

RIDGID Tools

Professional-grade wrenches and cutters for precise work on plumbing fittings.

Milwaukee Tools

Cordless drills and drivers for efficient disassembly and reassembly of faucet components.

Real results

Before and after.

Kitchen Faucet Drip Repair

Before

A homeowner in Eastport had a kitchen faucet that dripped constantly, wasting water and leaving stains in the sink. The handle was also loose and hard to turn.

After

We replaced the worn cartridge and tightened the handle assembly. The faucet now operates smoothly with no drips. The repair took 45 minutes and cost $220.

Bathroom Faucet Leak Fix

Before

In a Historic District home, a bathroom faucet was leaking from the base, causing water to pool on the vanity and drip into the cabinet below.

After

We replaced the O-ring and seat, and resealed the faucet base. The leak stopped completely, and the cabinet stayed dry. The repair cost $180.

Outdoor Faucet Repair

Before

A West Annapolis homeowner had an outdoor faucet that wouldn't shut off completely and leaked when the hose was connected.

After

We replaced the vacuum breaker and packing nut, restoring proper operation. The faucet now shuts off tightly with no leaks. The repair cost $150.

Problems we solve

Common Faucet Problems We Solve

We fix all types of faucet issues, from minor drips to major leaks. Here are some of the most common problems we encounter in Annapolis homes.

Ask a pro →
01

Dripping faucet that won't stop

We replace the worn cartridge or O-ring that's causing the drip. Most repairs take under an hour and stop the leak immediately.

↗
02

Leak under the sink

We locate the source, which is often a loose connection or corroded supply line. We repair or replace the faulty part and dry the area.

↗
03

Low water pressure at the faucet

We clean or replace the aerator, check the shutoff valve, and flush the lines if needed. We restore full water pressure.

↗
04

Faucet handle is loose or hard to turn

We tighten or replace the handle assembly and lubricate moving parts. If the valve stem is damaged, we replace it.

↗
Transparent pricing

Faucet Repair Pricing in Annapolis

$150 - $350 depending on scope

Faucet repair costs in Annapolis typically range from $150 to $350, depending on the parts and labor required. Simple fixes like washer replacements are on the lower end, while cartridge replacements or supply line repairs cost more. We provide upfront pricing before any work begins, so you know exactly what to expect. We also offer same-day service for most repairs. For affordable faucet repair in Annapolis Maryland, call us for a quote.

Our pricing is fair and transparent. We charge by the job, not by the hour, so you won't be surprised by the bill. We also guarantee our work.

01Type of faucet

Modern cartridge faucets are usually quicker to repair, while older compression faucets may require more labor to replace seats and springs.

03Accessibility

Faucets in tight spaces or behind heavy cabinets may take longer to access, increasing labor time.

04Additional repairs

If we find corroded shutoff valves or damaged supply lines, those repairs add to the cost but prevent future leaks.

Proof you can check

Trusted Faucet Repair Professionals

✓
Maryland Master Plumber LicenseMaryland State Board of Plumbing
✓
Maryland Journeyman Plumber LicenseMaryland State Board of Plumbing
✓
Backflow Prevention CertificationMaryland Department of the Environment
✓
OSHA Safety CertificationOccupational Safety and Health Administration
Customer reviews

What Customers Say About Our Faucet Repair

★★★★★
“Our kitchen faucet was dripping constantly and the handle was loose. The plumber arrived same day, replaced the cartridge, and tightened everything up. He also showed us the worn part and explained why it failed. The price was exactly what he quoted. We'll use them again for any plumbing work.”
SM

Sarah M.Homeowner, Eastport

✓ Verified
★★★★★
“The faucet in our rental property started leaking and we needed it fixed fast. They came out the same afternoon, fixed the leak, and even replaced a corroded shutoff valve. The tenant was happy, and we appreciated the quick turnaround and fair price.”
LK

Linda K.Homeowner, West Annapolis

✓ Verified
Good questions

Faucet Repair FAQs

+1 (831) 293-1204

The most common cause is a worn cartridge or O-ring, especially with hard water in Annapolis. Mineral buildup wears down rubber seals over time. Other causes include a loose packing nut, corroded valve seat, or damaged supply line. We diagnose the exact issue and fix it.

Most faucet repairs run $150 to $350, depending on the part and labor. Simple fixes like a washer replacement cost less, while cartridge replacements or supply line repairs cost more. We give you an upfront price before starting.

You can, but it's easy to damage supply lines or cross-thread connections, leading to leaks. If you're not comfortable with plumbing, it's safer to call a licensed plumber. We handle the job quickly and guarantee the work.

Our licensed plumbers fix leaking faucets in Annapolis and throughout Anne Arundel County. We repair all brands and types, from kitchen to bathroom faucets. Call us for same-day service and upfront pricing.

Ready when you are

Need Faucet Repair Annapolis MD? Call Today

Don't let a dripping faucet waste water and money. Our licensed plumbers are ready to help with same-day service and upfront pricing. Call now to schedule your repair.

Schedule Repair +1 (831) 293-1204 →
Request an appointment

Contact Plumber Annapolis MD

Call us at +1 (831) 293-1204 or email [email protected]. We answer the phone 24/7 for emergencies and schedule same-day or next-day visits for non-urgent work. Tell us what's wrong and your address, and we'll give you a time window and a price range before we head out.

Call anytime+1 (831) 293-1204Email the office[email protected]
Office hoursOpen 24 hours · 7 days a week
Request received — our team will be in touch shortly.
Tap to call+1 (831) 293-1204